Premium cannabis packaging and hardware for brands that want to win.
ADDRESS
FOR INQUIRIES
EMAIL OUR TEAM
Copyright © 2026 Rectitude Partners. All rights reserved. Powered by Sync Scrum WE MAKE DOPE SHIT
Mini Mod-Style AIO Hardware
1.0mL and 2.0mL mini disposable hardware with customizable fluid inlet sizing, 3.7V standard power, inhale activation, wide viscosity compatibility, and Type-C charging.
Complete specification data for procurement, formulation, and compliance purposes.
| Product | LYNX |
|---|---|
| Product Type | Mod Style Mini Disposable |
| Version / Size | 1.0mL / 2.0mL |
| Max. Fill Volume | 1.0mL / 2.0mL |
| Gross Internal Volume | 1.05mL / 2.05mL |
| Dimensions | 63 × 22 × 12.7mm |
See the compact mod-style body, capacity options, slim profile, filling system, and customization possibilities up close.
When smoking exceeds load limits and a short circuit occurs, the white light stays on for 3 seconds, then the device enters dormancy.
Normal draw time is 10 seconds. If it exceeds 10 seconds, the light flashes 2 times and output stops.
Charging
Light remains on while charging
Silk Printing
MOQ 1,000Extra 2–3 days
Powder Coating
MOQ 1,000Extra 1–2 days
Laser Engraving
MOQ 5,000Extra 3–4 days
Electroplating
MOQ 10,000Extra 3–4 days
Soft Touch
MOQ 10,000Extra 5–7 days
Matte & Glossy Finish
-5°C to +35°C
45–75% RH
Have questions about our hardware, packaging, customization, or ordering process? Here are answers to the questions we hear most often.
LYNX is available in 1.0mL and 2.0mL versions. Gross internal volumes are 1.05mL and 2.05mL.
Yes. The standard inlet is 4 × 2.0mm. Options from 1.0–2.0mm are available upon request to tune vapor feel and taste.
The standard power is 3.7V (±0.5V). Additional power options are available upon request.
LYNX should be capped within 30 seconds after filling. The cap should be fully sealed, and the device should then be kept upside down for 1–2 hours.
Options include silk printing, powder coating, laser engraving, electroplating, soft touch, matte/glossy finishes, colored mouthpieces, and paper wraps. MOQ starts at 1,000 units for silk printing and powder coating
Still have questions? Email us at hello@rectitudepartners.com
| Standard Power |
|---|
| 3.7V (±0.5V) |
| Additional Power Options | Available upon request |
|---|
| Standard Resistance | 1.5 ± 0.1Ω |
|---|
| Resistance Options | 1.2–2.0Ω (upon request) |
|---|
| Standard Fluid Inlet | 4 × 2.0mm |
|---|
| Fluid Inlet Options | 1.0–2.0mm (upon request) |
|---|
| Activation | Inhale Activate |
|---|
| Battery Capacity | 260mAh |
|---|
| Viscosity Range | 1,000–110,000 cps |
|---|
| Charging Port | Type-C |
|---|
Fully Charged
Light flashes 20× then turns off
MOQ 10,000Extra 5–7 days
Color Mouthpieces
Color MouthpiecesExtra 5–7 days
Paper Wraps
MOQ 10,000Extra 5–7 days
Keep sealed with protective film during storage.
Complete one charge/discharge cycle every 180 days.
LYNX combines a mini mod form factor with customizable inlet options, broad viscosity range, and simple inhale activation.
Compact mod-inspired form factor. 63 × 22 × 12.7mm body designed to fit in the palm of your hand.
Available fluid inlet sizes — 1.0–2.0mm upon request — to customize vapor feel and taste.
1,000–110,000 cps compatibility across all common oil formulations.
Smooth and compact — easily concealed in the palm of your hand. Less than 2 ounces.
LYNX offers customizable fluid inlet sizes to adjust the vapor feel and taste. The standard inlet is 4 × 2.0mm; 1.0–2.0mm options are available upon request.
4 × 2.0mm
Default fluid inlet configuration for balanced vapor production.
1.0–2.0mm
Request a custom inlet size to adjust vapor feel and taste. Available upon request.
1.5 ± 0.1Ω
Standard resistance
Standard power · ±0.5V tolerance
No button required for drawing
260mAh rechargeable battery
Both versions share the same compact 63 × 22 × 12.7mm mod-style form factor.
Fill through the designated holes only. Keep the device vertical and cap within 30 seconds.
